- Net Wt. / Volume
- 10 packets
- Description
- General medical equipment (Notification number: 13BZ200924000001)
A nasal washing kit that can wash away dirt, dust, and pollen in the nasal cavity.
The Sinus Rinse cleaning solution is physiological saline with adjusted pH balance and osmotic pressure close to that of human body fluids. It contains approximately 96% sodium chloride and approximately 4% sodium bicarbonate and is mixed with 240mL of water to produce a cleaning solution. The cleaning solution does not irritate the nasal mucosa and will not cause your nose to become irritated, stingy, or painful.
Comes with a bottle that uses the "Large Volume & Low Pressure" system to flow a large amount of cleaning liquid with a small amount of force. The nozzle and cap are integrated, so it fits perfectly in any nostril.
Each bag of prepared cleaning agent has a 240mL bottle with a single-use capacity. General medical equipment. - Cautions
- <Important>
• If you have severe nasal or ear inflammation or nasal congestion, please consult a specialist before use.
• Do not blow your nose forcefully after use.
• Please check the bottle for any scratches or defects before use.
• If you feel pain, stop using it immediately and consult a specialist.
• If you have had nose or ear surgery, please consult your doctor.
• Please keep out of reach of children.
• Parents must be present when children (over 5 years old) are using the product.
• Please be sure to use the prepared cleaning agent in a NealMed exclusive bottle container.
• Please be sure to wash with hot water that is about body temperature (36 degrees).
• Please do not share bottle containers with others as there is a possibility of infection.
• Please store the bottle container in a clean place and replace it once every 3 months for hygiene.
• The cleaning fluid remaining in the nasal cavity may flow out a little after some time has passed.
<Maintenance after use>
(1) After use, throw away the remaining cleaning solution and wash the bottle, cap, and tube with running water.
(2) Fill the bottle with water and shake the capped bottle vigorously.
• At this time, press the tip of the cap with your finger to prevent the water from spilling out.
(3) Press the bottle firmly to clean the inside of the tube and cap. Make sure that no components of the cleaning solution (salt) remain in the bottle.
• Cover the tip of the cap with your palm to prevent water from splashing.
(4) Empty the bottles, remove the caps, and use a colander to dry them so that no water remains.
If the stains are severe, fill the bottle with water, add a few drops of neutral dish detergent, and wash as described in step (3).
After cleaning, rinse thoroughly so that no detergent components remain. - Ingredients
- Sodium chloride, sodium bicarbonate with purity greater than 99%
- How to Use
- (1) First, wash your hands thoroughly and open the bottle cap.
(2) Prepare hot water that has been warmed to body temperature (about 36 degrees). (Microwaving is also possible) Be careful not to overheat.
(3) Pour 240mL of hot water at an appropriate temperature into the bottle, then add the cleaning solution.
(4) Attach the cap firmly to the bottle and shake the bottle to prevent spillage by blocking the cap hole.
(5) While lowering your head and breathing through your mouth, slowly squeeze the bottle and squeeze out the liquid, allowing the cleaning liquid to flow out of the other nostril.
(6) Repeat the same procedure on the other side, and when finished, gently blow your nose with a tissue. (If you bite too hard, water may get into your ears) - Storage & Handling
- (1) After use, please store it in a dry place indoors.
(2) We recommend replacing it once every three months to prevent deterioration, dirt, and bacterial growth. - Country of Origin
- America
- Manufacturer
- NeilMed Scientifically formulated 0120-41-3173
- Distributor
- NeilMed Scientifically formulated