- Net Wt. / Volume
- 700ml
- Description
- ●Super strong bath detergent that thoroughly breaks down stubborn water stains and soap scum.
●Adjusted to be alkaline so that it can be used in combination with many mold removal agents whose main ingredient is sodium hypochlorite. - Cautions
- • Do not use for other purposes
• Be sure to wear protective equipment (safety glasses, cooking gloves, etc.)
• Keep out of reach of children
• Do not spray with the tip in the "stop" position. When set to "out", liquid may come out.
• Use with good ventilation
• When using at a position higher than the eyes, soak it in a sponge etc. and then wash it by stroking it.
• Wash your hands thoroughly after use, and if you are concerned about your hands getting rough, use cream etc.
• Do not spray towards people
• If you are concerned about stains or discoloration, be sure to test it in an inconspicuous place before use.
• Avoid using if you are allergic to detergent ingredients.
• Do not store in places where there is a risk of freezing, in direct sunlight, near fire, or in places with high temperatures of 40 degrees or higher. - Ingredients
- Surfactant (2.8% alkyl glucoside), solvent, sequestering agent, disinfectant
- How to Use
- • Turn the tip of the nozzle so that the "output" part is properly centered (do not point it at your face when operating the nozzle part).
• Spray directly from a distance of approximately 15cm from the stain, then wash with a sponge, etc., and rinse thoroughly with cold or hot water.
• After use, wash the remaining liquid in the spray nozzle and the liquid dripping into the container with water or wipe it with a cloth, etc., and be sure to return the nozzle tip to the "stop" position.
• When using, be sure to wear protective equipment (safety glasses, cooking gloves, etc.).
• If the liquid drips down the spray nozzle into the container, press the bottom of the container with a cloth before use.
• For severe stains, it is effective to spray and leave for 2 to 3 minutes.
• Do not spray directly on areas higher than the eyes, but let it soak into a sponge, etc. before washing.
• To sterilize, wipe off the moisture, leave for 5 minutes, and rinse (this will not sterilize all bacteria).
• Please be sure to test it in an inconspicuous area before use, as it may discolor on some bathtubs, floors, and walls. - Country of Origin
- Japan
- Manufacturer
- Linley 03-3541-4851
- Distributor
- Linley